Suitable for 25mm tube. Made of marine grade heavy duty UV treated Nylon. Specifications: Size A - 54mm B - 25.5mm C - 8.4mm D - 23.5mm Model 8601012 Material Marine Grade Nylon

Protect your boat without putting a dent in your wallet. Kaiser Boating fenders offer superior protection for your docked boat, taking the beating of wind and waves so your boat doesn't have to. Constructed with high quality marine-grade vinyl with high-gloss finish, and feature molded ribs to minimize roll. The...

Protect your boat without putting a dent in your wallet. Kaiser Boating fenders offer superior protection for your docked boat, taking the beating of wind and waves so your boat doesn't have to. Constructed with high quality marine-grade vinyl with high-gloss finish, and feature molded ribs to minimize roll. The...

Consider using these side mount brackets if you prefer to attach the bimini top frame to the inside wall of the boat, rather than mounting it on the gunwale. This approach provides greater flexibility for adjusting the bimini top to your desired height, resulting in a lower position. However, keep...

Protect your boat without putting a dent in your wallet. Kaiser Boating fenders offer superior protection for your docked boat, taking the beating of wind and waves so your boat doesn't have to. Constructed with high quality marine-grade vinyl with high-gloss finish, and feature molded ribs to minimize roll. The...

• Made tough- made of 25MM (1 inch) nylon webbing, stainless steel 304 snap hook.
• Fully Adjustable - Adjust from 80cm to 140cm. Great for Most size Biminis and awnings. If you think it is too long, Please cut it and flame it.
• Highly UV Resistant.- Our webbing is UV -RESISTANT, More durable than other straps.
• Tough Hardware - Stainless steel 304 snap hook and deck loops are corrosion resistant. last for years.
• Easy to use- a loop at one end and a single snap hook at the other end. Just place the loop around the Bimini pole and then feed the clip end through the loop.

This 25 x 1.6mm UV Nylon Tube End is made of marine grade heavy duty UV treated Nylon.

• Water-repellent and breathable fabric
• Made of 300 Denier 100% Polyester, which provides resistance against UV rays and mildew
• Elastic hem with reinforced base for a snug fit
• 3 zippers on the door side allow for easy access
• Double stitched interlock seams with "rot-proof" thread for added durability
• 12 month warranty (excluding weather soiling, stains from environmental pollution and/or standing water, cuts from sharp objects, neglect, accident or misuse)

• Water-repellent and breathable fabric
• Made of 300 Denier 100% Polyester, which provides resistance against UV rays and mildew
• Elastic hem with reinforced base for a snug fit
• 3 zippers on the door side allow for easy access
• Double stitched interlock seams with "rot-proof" thread for added durability
• 12 month warranty (excluding weather soiling, stains from environmental pollution and/or standing water, cuts from sharp objects, neglect, accident or misuse)

• Water-repellent and breathable fabric
• Made of 300 Denier 100% Polyester, which provides resistance against UV rays and mildew
• Elastic hem with reinforced base for a snug fit
• 3 zippers on the door side allow for easy access
• Double stitched interlock seams with "rot-proof" thread for added durability
• 12 month warranty (excluding weather soiling, stains from environmental pollution and/or standing water, cuts from sharp objects, neglect, accident or misuse)

• 3 Bows (the Bows are the number of bars that run through the Bimini top to secure it to the frame)
• 2 Rear Support Poles (the rear poles are required if you want to install Rocket Launcher)
• 2 Adjustable Front Straps
• 8.1oz 600 Denier 100% Polyester Resists UV and Mildew
• Double Stitched Interlock seams with "Rot-proof" thread
• Matching storage boot with a non-corrosive, heavy duty zipper - Boot protects cover when not in use
• All fittings made of durable marine-grade nylon
• Easy to assemble and install (instruction included)
• Height from mounting point - 130cm
• 12 month warranty (excluding weather soiling, stains from environmental pollution and/or standing water, cuts from sharp objects, neglect, accident or misuse)

• 3 Bows (the Bows are the number of bars that run through the Bimini top to secure it to the frame)
• 2 Rear Support Poles (the rear poles are required if you want to install Rocket Launcher)
• 2 Adjustable Front Straps
• 8.1oz 600 Denier 100% Polyester Resists UV and Mildew
• Double Stitched Interlock seams with "Rot-proof" thread
• Matching storage boot with a non-corrosive, heavy duty zipper - Boot protects cover when not in use
• All fittings made of durable marine-grade nylon
• Easy to assemble and install (instruction included)
• Height from mounting point - 130cm
• 12 month warranty (excluding weather soiling, stains from environmental pollution and/or standing water, cuts from sharp objects, neglect, accident or misuse)

• 3 Bows (the Bows are the number of bars that run through the Bimini top to secure it to the frame)
• 2 Rear Support Poles (the rear poles are required if you want to install Rocket Launcher)
• 2 Adjustable Front Straps
• 8.1oz 600 Denier 100% Polyester Resists UV and Mildew
• Double Stitched Interlock seams with "Rot-proof" thread
• Matching storage boot with a non-corrosive, heavy duty zipper - Boot protects cover when not in use
• All fittings made of durable marine-grade nylon
• Easy to assemble and install (instruction included)
• Height from mounting point - 130cm
• 12 month warranty (excluding weather soiling, stains from environmental pollution and/or standing water, cuts from sharp objects, neglect, accident or misuse)

• 3 Bows (the Bows are the number of bars that run through the Bimini top to secure it to the frame)
• 2 Rear Support Poles (the rear poles are required if you want to install Rocket Launcher)
• 2 Adjustable Front Straps
• 8.1oz 600 Denier 100% Polyester Resists UV and Mildew
• Double Stitched Interlock seams with "Rot-proof" thread
• Matching storage boot with a non-corrosive, heavy duty zipper - Boot protects cover when not in use
• All fittings made of durable marine-grade nylon
• Easy to assemble and install (instruction included)
• Height from mounting point - 130cm
• 12 month warranty (excluding weather soiling, stains from environmental pollution and/or standing water, cuts from sharp objects, neglect, accident or misuse)

• 3 Bows (the Bows are the number of bars that run through the Bimini top to secure it to the frame)
• 2 Rear Support Poles (the rear poles are required if you want to install Rocket Launcher)
• 2 Adjustable Front Straps
• 8.1oz 600 Denier 100% Polyester Resists UV and Mildew
• Double Stitched Interlock seams with "Rot-proof" thread
• Matching storage boot with a non-corrosive, heavy duty zipper - Boot protects cover when not in use
• All fittings made of durable marine-grade nylon
• Easy to assemble and install (instruction included)
• Height from mounting point - 130cm
• 12 month warranty (excluding weather soiling, stains from environmental pollution and/or standing water, cuts from sharp objects, neglect, accident or misuse)

• Heavy duty marine grade anodised aluminium rail
• Vinyl coated swivelling hook to protect the boat's gunwales from scratches and damage
• 3 non-slip polypropylene steps and 2 fully adjustable hold-off legs
• Can be hooked over boat gunwale or transom
• Ideal for waterskiers, divers, spearfishermen or anyone trying to get in and out of their boat with ease
• Also perfect for climbing in and out of the boat while on the trailer
• Folds away flat for easy & neat storage
• Suits gunwales up to 200mm wide.
• Recommended Max Weight: 80kg

The 3-Step Telescopic Boat Ladder MENBA040 is crafted from stainless steel, This versatile ladder can be bolted to a horizontal platform, such as a boat floor or side railings, making it suitable for a variety of marine applications, including pontoon boats. Key Features: Easy Installation: Simple installation process with no...

This boat ladder is designed to be bolted to a horizontal platform such as the boat floor or side railings depending on the installation. The design of this platform ladder makes it possible to be used as on a pontoon boat. It's simple to install features non-slip rubber steps and...

This 3 step Stainless steel telescoping ladder folds compactly and slides beneath your swim platform for storage.

• Geniune 316 Stainless Steel 
• Flame Guard Safety Stop (stops gas if flame goes out).
• Auto Ignition
• Hood Fastening Latch
• Cast Iron Cooking Grill
• 316 Stainless Steel Drip Tray
• Hinged 316 Stainless Steel Hood with window
• 1100mm long Standard Aust. Screw Type Regulator
• Set Up for LPG (Note: NO Gas Bottle Supplied)
• U-Shaped Double Stainless Steel Burner: 2.75kpa pressure with 13 Mj/h Input Rate